home › event - inkjet-printed, organic complementary circuits integrated with polymer mechanical sensors


Inkjet-printed, Organic Complementary Circuits Integrated with Polymer Mechanical Sensors
Conferences & Talks

Electrochemical Society 218th Meeting

10 October 2010 - 15 October 2010
Las Vegas, Nevada



Organic complementary circuits are demonstrated for integration with mechanical sensors to enable the fabrication of a sensor tape to detect mechanical impacts correlated to traumatic brain injury. The control electronics were fabricated by inkjet patterning with p- and n-channel organic semiconductors and printed electrodes based on metal nanoparticles. Typical carrier mobilities for these printed TFTs are ~0.005-0.015 cm2/Vs for both semiconductors with current on-to-off ratios >10^4. The inverters showed a typical gain of 4 with VDD at 10V. The printed amplifiers are integrated with mechanical sensors consisted of ferroelectric polymers, and the acceleration sensor sensitivity is calibrated to be 2mV/g.


upcoming events   view all 

The Experience When Business Meets Design
Brian Solis
27 October 2016
PARC Forum  

AI Case Studies: Pushing the Frontiers of Systems Engineering
Tolga Kurtoglu
9 November 2016 | San Francisco, CA
Conferences & Talks  

2016 AIChE Annual Meeting: Energy and Transport Processes
Corie L. Cobb
14 November 2016 - 15 November 2016 | San Francisco, CA
Conferences & Talks  

Printed Electronics USA 2016 - Visit PARC’s Booth #T20
Ross Bringans, Markus Larsson, Janos Veres
16 November 2016 - 17 November 2016 | Santa Clara, CA
Conferences & Talks